Bambu Lab Complete Hotend Assembly - X1 Series

Are you looking to buy a Bambu Labs X1 Complete Hotend Assembly with Hardened Steel Nozzle in Australia?

Overview:
The Complete Hotend Assembly with Hardened Steel Nozzle is specially designed for the Bambu Lab X1 Series 3D Printers.
Each one consitsts of a Hotend with Hardened Steel Nozzle, Ceramic Heater, Thermistor, Silicone Sock for Hotend and Cooling Fan.

Highlights of Various Nozzle Diameters

0.2mm Nozzle
Optimal Print Fineness

Extremely small layer gaps
More detailed on the vertical print surface

0.2mm Nozzle
Optimal Print Fineness

Smaller diameter extrudes thin filaments
High resolution on the horizontal print surface

0.6mm and 0.8mm Nozzle
Faster Print Speed

Larger diameter extrudes more filaments per second, resulting in faster print speed

The 0.4mm nozzle is widely recognized as the standard nozzle diameter for modern 3D printers due to its optimal balance between print quality and print speed. This nozzle size is utilized in both the Bambu Lab X1 Series and P1 Series 3D printers.

Filament Compatibility

Material	0.2 mm Nozzle	0.4 mm Nozzle	0.6 mm Nozzle	0.8 mm Nozzle	Hardened Steel Required?
General PLA	YES	YES	YES	YES	Optional
PLA Sparkle	*NO	YES	YES	YES	Optional
PLA Marble	*NO	YES	YES	YES	Optional
Wood/Rock/Metal-filled PLA	*NO	YES	YES	YES	Optional
PETG	YES	YES	YES	YES	Optional
PVA	YES	YES	YES	YES	Optional
ABS	YES	YES	YES	YES	Optional
ASA	YES	YES	YES	YES	Optional
PC	YES	YES	YES	YES	Optional
PA	*NO	YES	YES	YES	Optional
TPU	*NO	YES	YES	YES	Optional
Bambu PLA-CF	*NO	*Highly Recommended	YES	YES	*Required
Bambu PETG-CF	*NO	*Highly Recommended	YES	YES	*Required
Bambu PAHT-CF	*NO	YES	*Highly Recommended	YES	*Required
Bambu PET-CF	*NO	YES	*Highly Recommended	YES	*Required
CF/GF Filaments from other brands	*NO	Not Recommended	YES	YES	*Required

[*Note]

Filaments with carbon fiber, glass fiber, metal, or other inorganic particles are prone to clog a 0.2 mm nozzle.
For filaments containing carbon fiber or glass fiber, it is highly recommended to use a hardened steel 0.6 mm nozzle to minimize the risk of clogging and abrasion.
Bambu PLA-CF and Bambu PETG-CF have been extensively tested and proven to have a low risk of clogging when printed with a hardened steel 0.4 mm nozzle, while also achieving higher print quality.

Learn more about filament compatibility on Bambu Lab Wiki.

Configuration of Bambu Hotend

If you need to swap your nozzle, you can either replace the Hotend with Nozzle on your original complete hotend assembly or replace the whole Complete Hotend Assembly.

Learn more about replacing the complete hotend assembly on Bambu Lab Wiki.