Bambu Lab Support Filament for PA/PET

Looking for Bambu Lab Support Filament for PA/PET in Australia?

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.

 Recommended Printing Settings

• Drying Settings before Printing - 80 °C, 8 - 12 h
• Pringting and Keeping Container's Humidity - < 20% RH (Sealed, with Desiccant)
• Nozzle Temperature - 260 - 290 °C
• Bed Tempreature (with PVP Glue) - 80 - 100 °C
• Printing Speed - < 100 mm/s

Physicial Properties

• Density - 1.17 g/cm³
• Vicar Softening Temperature - N/A
• Heat Deflection Temperature - N/A
• Melting Temperature - 255 °C
• Melt Index - 29.2 ± 2.1 g/10 min
  

Mechanical Properties

• Tensile Strength - N/A
• Breaking Elongation Rate - N/A
• Bending Modulus - N/A
• Bending Strength - N/A
• Impact Strength - N/A

Attribute Comparison

1. Support filament cannot be used to print an item alone, but only to print the supporting portion of that item. AMS is recommended for multi-material printing with Bambu Support filament.
2. Bambu Support filament can only be used with compatible temperatures and filament types. Failure to follow these guidelines can lead to clogs or other issues.

Included

• 1x Filament 0.5kg & Desiccant
• 1x Filament Label

Browse more

• Browse Prusament Filament
• Browse ASA Filament
• Browse ABS Filament
• Browse Nylon Filament
• Browse PC Filament
• Browse PETG Filament
• Browse PLA Filaments (also PLA+)
• Browse PVA Filament
• Browse Silk Filament
• Browse SLA Resin
• Browse Speciality Filament
• Browse TPU Filament 
• Check out all our 3D Printing Supplies