Bambu Lab PC Filament

Looking for Bambu Labs PC Filament 1kg in Australia?

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

Recommended Printing Settings

• Drying Settings before Printing - 80 °C，8h
• Pringting and Keeping Container's Humidity - < 20% RH (Sealed, with Desiccant)
• Nozzle Temperature - 260 - 280 °C
• Bed Tempreature (with PVP Glue) - 90 - 110 °C
• Printing Speed - < 300 mm/s

Physicial Properties

• Density - 1.20 g/cm³
• Vicar Softening Temperature - 119 °C
• Heat Deflection Temperature - 117 °C
• Melting Temperature - 228 °C
• Melt Index - 32.2 ± 2.9 g/10 min
  

Mechanical Properties

• Tensile Strength - 62 ± 2 MPa
• Breaking Elongation Rate - 3.8 ± 0.3 %
• Bending Modulus - 2310 ± 70 MPa
• Bending Strength - 108 ± 4 MPa
• Impact Strength - 34.8 ± 2.1 kJ/m²

Included

• 1x Filament & Desiccant
• Instructions & Spool sticker
• 1x Filament Label

Instructions for Printed Spool

When you're finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).

Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.

Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.

Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.

Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).

Step 2. Tear apart and pull out the plastic strips.

Learn more about swapping the new filament with Bambu Reusable Spool on Wiki, Click Here.

Browse more

• Browse all Bambu Lab Filament
• Browse all Bambu Lab X1 3D Printer, Spare Parts & Accessories
• Browse all Bambu Lab P1P/P1PS 3D Printer, Spare Parts & Accessories
• Browse all Bambu AMS Spare Parts & Accessories
  
• Browse all Bambu Lab A1 Mini 3D Printer, Spare Parts & Accessories
• Browse all Bambu Labs
• Browse all Printer Spare Parts
• Browse ASA Filament
• Browse ABS Filament
• Browse Nylon Filament
• Browse PC Filament
• Browse PETG Filament
• Browse PLA Filaments (also PLA+)
• Browse PVA Filament
• Browse Silk Filament
• Browse Speciality Filament
• Browse TPU Filament 
• Check out all our 3D Printing Supplies