Bambu Lab TPU 95A HF Filament 1.75mm 1kg

Bambu TPU 95A HF is an optimised TPU filament designed for high-speed 3D printing. Compared to regular TPU 95A, TPU 95A HF offers an impressive 3x faster printing speed, effectively addressing the common problem of lengthy prints associated with other TPU filaments. TPU 95A HF maintains exceptional interlayer adhesion, impact resistance, flexibility, and cold-temperature resilience, just like traditional TPU filaments. Experience faster TPU printing without any compromises!

pa6-cf filament

High Speed Printing

Elevate your TPU printing efficiency to the next level with Bambu TPU 95A HF, featuring a print speed that's 3 times faster than standard TPU 95A.

tpu hf

	Bambu TPU 95A	Bambu TPU 95A HF
Nozzle Temperature / °C	230	230
Max Volumetric Speed / (mm³/s)	3.6	12
Printing Speed / (mm/s)	44	147
Model Specimens	Diameter: 50 mm Height: 100 mm Infill:40%

Soft and Flexible

Bambu TPU HF is an exceptionally soft and flexible filament with extraordinary impact resistance, enabling you to print parts that need withstand impact, collision, and falling.

asa filament

Widely Used Application

tpu filament

Accessory Compatibility

	Recommended	Not Recommended
Build Plate	Cool Plate, Engineering Plate, High Temperature Plate or Textured PEI Plate	/
Hotend	Hardened Steel Nozzle 0.4 / 0.6 / 0.8 mm) Stainless Steel Nozzle (0.4 mm)	Stainless Steel Nozzle (0.2 mm)
Glue	Bambu Liquid Glue Glue Stick	/

Recommended Printing Settings

Drying Settings (Blast Drying Oven): 70 °C，8 h
Printing and Keeping Container's Humidity: < 20% RH (Sealed, with Desiccant)
Nozzle Temperature: 220 - 240 °C
Bed Temperature (with glue): 30 - 35 °C
Printing Speed: < 200 mm/s

Physical Properties

Density: 1.22 g/cm³
Vicat Softening Temperature: N / A
Heat Deflection Temperature: N / A
Melting Temperature: 183 °C
Melt Index: 36.5 ± 2.6 g/10 min

Mechanical Properties

Tensile Strength: 27.3 ± 0.8 MPa
Breaking Elongation Rate: > 650%
Bending Modulus: N / A
Bending Strength : N / A
Impact Strength : N / A

Printing Tips

Drying conditions: 70℃ for 8 hrs. TPU 95A HF is highly sensitive to humidity. To achieve optimal printing performance, it is recommeded further drying before use and after storage. For more details please refer to: Filament drying instructions on WIKI.
To obtain higher printing quality, please check TPU Printing Guide before printing.

Included

1x Filament & Desiccant
Instructions & Spool sticker
1x Filament Label

Instructions for Printed Spool

When you're finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).

Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.

Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.

Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.

Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).

Step 2. Tear apart and pull out the plastic strips.

Learn more about swapping the new filament with Bambu Reusable Spool on Wiki, Click Here.