Bambu Lab PLA Glow Filament 1.75mm 1kg

PLA Glow stands out due to its incorporation of a unique additive: luminous powder. This variant retains the familiar qualities of traditional PLA, including easy printing, high quality, and exceptional overall mechanical properties. What sets PLA Glow apart is its distinctive feature - it glows in the dark. This makes it the optimal selection for crafting luminous nameplates, logos, jewellery, and various models that require a captivating glow effect.

pa6-cf filament

Unique Glow in Low Light Conditions

Bambu PLA Glow incorporates a distinct additive: luminous powder, which imparts a special property to printed objects, causing them to emit a captivating glow in the dark.

asa filament

Accessory Compatibility

	Recommended	Not Recommended
Build Plate	Cool Plate, High Temperature Plate or Textured PEI Plate	Engineering Plate
Hotend	0.4, 0.6, 0.8 mm Hardened Steel Nozzle*	0.2 mm Nozzle
Glue	Bambu Liquid Glue Glue Stick	/
AMS & AMS lite	AMS	AMS lite*

* A hardened nozzle is required when printing regularly.

* It is not recommended to print Bambu PLA Glow and other glow-in-the-dark PLA filaments with AMS Lite. These filaments, being hard and rough, may cause feeding failures due to substantial feeding resistance.

RFID for Intelligent Printing]

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

图片加载失败文案

Recommended Printing Settings

Drying Settings before Printing - 55 °C，8 h
Pringting and Keeping Container's Humidity - < 20% RH (Sealed, with Desiccant)
Nozzle Temperature - 190 - 230 °
Bed Tempreature (with PVP Glue) - 35 - 45 °C
Printing Speed - < 300 mm/s

Physicial Properties

Density - 1.24 g/cm³
Vicar Softening Temperature - 57 °C
Heat Deflection Temperature - 57 °C
Melting Temperature - 160 °C
Melt Index - 42.4 ± 3.5 g/10 min

Mechanical Properties

Tensile Strength - 39 ± 2 MPa
Breaking Elongation Rate - 12.2 ± 0.4 %
Bending Modulus - 2750 ± 60 MPa
Bending Strength - 76 ± 3 MPa
Impact Strength - 26.6 ± 2.8 kJ/m²

Printing Tips

For better print results, please reduce the Max Volumetric speed from 21 mm³/s to 15 mm³/s when printing PLA Basic Silver/Gold/Bronze.

Print Your Own Spool Now

Bambu Lab 3D printer comes with a spool model. Print Spool Part 1&2 from the build-in files!

图片加载失败文案

Instructions for Printed Spool

When you're finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).

Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.

Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.

Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.

Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).

Step 2. Tear apart and pull out the plastic strips.

Learn more about swapping the new filament with Bambu Reusable Spool on Wiki, Click Here.