-
Description
As fellow pilots, we at Armattan Quads are thrilled and honored to release our Nutria into the wild for every FPV pilot in the world to love and enjoy just as much as we have during testing!
We guarantee that your new Armattan Quads Nutria is the toughest and most rigid frame we have ever made, and at the same time the most unyielding 5" or 7" FPV frame EVER made ... all while feeling so very precisely balanced and locked in on the sticks.
It's like magic, but it's not ... it's engineering, lots of experience, and real-world testing from various pilots of various FPV disciplines ... and then you guessed it ... more engineering. Being the most experienced FPV frame manufacturer in the industry since 2012 has its perks.
The groundbreaking arm interlock system is the key to the heart within your Nutria's strength, making tuning easier for those that love to chase a perfect tune, but also often more unnecessary than ever before for those that just want to fly.
All of these attributes, and many more, are by design ... For Pilots, By Pilots.
The Nutria looks SO GOOD in both 5" and 7" making it difficult to choose! Why not both?
All four arms on a bare frame can be changed out quickly with very little effort or rush in less than a minute, and even much faster with intent and a couple practice runs.
Either grab a spare set of arms in a different size for an easy swap, or grab a spare frame. EVERY single part on a 5" and 7" Nutria is interchangeable. The arms are the only difference.
Specifications
- Camera Cage Material: Titanium, mirror polish, clear anodised
- Tail Post Material: Aluminium, mirror polish, clear anodised
- Camera Brace Material: Aluminium, matte finish, dark silver anodised
- Weight: 186 grams (7")
- Motor to Motor: 290 mm (7")
- Motor Mounting: 16x16 or 19x19. 5 mm thick arms
- Stack Mounting (Front): 30x30 (remove standoffs) or 20x20
- Stack Mounting (Center): 30x30, 25.5x25.5, or 20x20
- Stack/VTX Mounting (Rear): 25.5x25.5 or 20x20
- Stack/VTX Mounting (Top Plate Rear): 25.5x25.5
- VTX Antenna Mounting: Rear Tail Posts can be flipped up or down, as needed
- Stack Height: 25 mm
- Camera Mounting: 19 mm to 22 mm, use M2 Nylon Washers (HW039) or O-Rings to dampen and/or mount cameras 20 mm or less
- Prop Clearance: 7.25 inches (7")
- Bottom Plate Thickness: 3 mm
- Main Center Plate Thickness: 4mm
- Top Plate Thickness: 4mm
- Cam Cage Plate Thickness: 2mm
Browse more
- Browse all Armattan
- Browse all Frame Kits
- Browse all Micro Frames
