3DXTech EZPC (Polycarbonate) Filament 1.75mm 750g

Are You Looking To Buy EZPC Polycarbonate Filament In Australia?

ezPC™ (Polycarbonate) is a premium Polycarbonate created for ease of printing on the widest array of 3D printers. ezPC™ prints like a dream while offering low warp, excellent mechanical properties, heat resistance, and outstanding impact resistance. Ease of printing and excellent properties – the best of both worlds!

ezPC™ Polycarbonate 3D Printer Filament

This polymer was developed specifically for 3D printing functional prototypes and end-use parts. It was formulated to allow for ease of printing coupled with exceptional mechanical and thermal properties.

ezPC™ Polycarbonate is an excellent choice for printing parts that would ordinarily fail when using standard materials such as PLA, PETG, or ABS. We consider this an excellent bridge in performance between these lower performance materials and higher priced materials such as Ultem or PEEK.

Benefits of ezPC Include:

Low warp, high heat resistance, and excellent mechanical properties
Ease of use on a wide array of printers, no heated chamber needed!
High thermal properties with a Tg of 118°C and HDT of 112°C
Superior thermal properties vs. PLA, PETG, ABS, and ASA
No odors or hazardous fumes while printing making it ideal for a home or office environment
Perfect for functional end-use parts as well as prototypes
Excellent adhesion to our AquaTek™ X1 USM Water Soluble Support

TECHNICAL DATA SHEET

Click HERE to open this material's TDS

SAFETY DATA SHEET

Click HERE to open this material's SDS

Filament Specifications:

1.75mm +/- 0.05mm in diameter

Recommended Print Settings:

Extruder: 255-275°C
Bed Temp: 90-110°C
Fan Speed: No fan
Bed Prep: Magigoo Bed Prep Adhesive or Nano Polymer Adhesive gives us the best results
Heated Chamber: Not required
Print Speed: 40-60mm/s
Supports: Water soluble AquaTek™ X1 USM works great for complex parts.
Drying Instructions: 80°C for 4+ hours.

Please note that this material absorbs moisture after opening from the package and may need to be dried for optimal printing. If drying is necessary, please dry at 80°C for a minimum of 4 hours.